DEVELOPMENT AND VALIDATION OF THE PROTOTYPE OF AN INTELLIGENT CONVERSION AND CONNECTION UNIT (BICC) FOR GRID-CONNECTED PHOTOVOLTAIC AND WITH STORAGE SYSTEM
DOI:
https://doi.org/10.59627/cbens.2016.1796Keywords:
Grid-Connected, Storage systems, Bidirectional conversionAbstract
This paper presents studies and implementation of a novel grid-connected PV system with storage. The goal of this project is to validate the operation and to determine the benefits and limitations of integrating storage with gridconnected PV systems. The objective is to evaluate the viability of using complementary electricity storage for meeting the local evening peak demands - “night-time peak shaving” in a typical load curve of CEMIG D’s feeder. A novel and versatile control unit - the Bidirectional Intelligent Conversion and Connection Unit - BICC has been developed to control the flow of energy from the electricity sources - PV generator, battery bank, and electric-power grid. In designing this electronic system, we adopted a topology in which the inverter and the maximum power tracking - MPPT maximize the available power by incorporating two separate and independent converters. In the first phase of the project, a prototype of the system - PV with storage and the BICC unit has been installed at GREEN Solar-IPUC in PUC Minas and been under test to evaluate its performance. These trials have been used to optimize system parameters in order to improve the BICC and its interfacing parameters and ensure safe operation of PV-Storage system with the grid. This paper reports on the design and advantages of the BICC, the procedures used in the parameter optimization of the prototype, the effectiveness of the BICC in improving the control and connection, conformity to standards, and the viability of scale up for the second phase testing connected to the electric grid (for the utility CEMIG) with storage at the football stadium, Arena do Jacare, located in Sete Lagoas, Minas Gerais.
Downloads
References
ABNT NBR IEC-62116:2012: Test procedure for anti-islanding inverter systems PV connected to the grid, 1.0b edition, published 061/03/2012.
ABNT/NBR 16149: Photovoltaics (PV) systems characteristics of the utility interface, 1st edition, published 01/03/2013.
ABNT NBR 16150: Photovoltaic (PV) systems–Characteristics of the utility interface–Conformity test procedure, 1st edition, published 01/03/2013.
Alanne K, Saari A. Distributed energy generation and sustainable development. Renewable and Sustainable Energy Reviews, v.10, p. 539-558, 2006.
Bakos, G.C. Distributed power generation a case study of small scale PV in Greece. Applied Energy, v. 86, p. 1757–1766,2009.
Dalton, G.J., Lockington, D.A. and Baldock, T.E.. Feasibility analysis of renewable energy supply options for a gridconnected large hotel.Renewable Energy, v. 34, p.955–964, 2009.
Diniz, A.S.A.C., Machado Neto, L. V., Oliveira Filho, D. et. al. Development of a Grid-Connected Photovoltaic Storage System Using Novel Bidirectional Intelligent Conversion and Connection. 40th IEEE Photovoltaic Specialists Conference; Colorado, USA, 2014. International Energy Agency (IEA), 2014.
Nourai, A. Installation of the First Distributed Energy Storage System (DESS) at American Electric Power (AEP). SANDIA Report: SAND2007-3580.
PVTech.Grid-connected PV energy storage installations to triple in 2015.Disponível em: <http://www.pvtech.org/guest-blog/grid_connected_pv_energy_storage_installations_to_triple_in_2015>. Acessado em: 20 out. 2015.
Toledo, O. M.; Oliveira Filho, D.; Diniz, A. S. A. C., "Methodology for evaluation of grid-tie connection of distributed energy resources case study with photovoltaic and energy storage", IEEE Transactions on Power Systems, vol. 28, pp. 1-1, 2012.
Toshiba (2012), personal communication. Technical visit to Toshiba and oral communication (Nov/2012), Miyakojima, Japan. http://www.sidsenergyforall.org.